Technical notes to improve the quality of wall construction with gas blocks
1- Due to the existence of a large number of air bubbles inside the gas blocks that are in the production process for styling the blocks, wetting the blocks at runtime and performing any kind of plaster, cement, tiling, etc. is required.
2- In order to reduce the mortality and financial losses in earthquakes, it is imperative to observe the technical and engineering principles for connecting the walls to concrete or metal structures.
3- The Nobahar Marand gas Concrete Company has been supplying special profiles for connecting gas blocks to the wall and wall to wall connections, which is recommended.
4- the horizontal groove for pipeline HVAC is better not to be on meeting point of two blocks.
5- To build the wall, Use of Silex glue is recommended. For each cubic meter, 15 kg of glue is required. – The wall is 20
6-using glue consumption is economically more affordable than Sand and cement mortar
7- It is better to use a abrasive when installing switches and sockets boxes.
8- nobahar marand concrete company Engineering and after sales services units is ready to visit projects and provide technical information to customers.
Description | unit | Standard requirements
AAC-2 |
Silex | |
Impact Resistant
|
Kg/cm2 | Standard | 25-20 | |
ISR1 8593 |
20-25 | 33-37 | ||
pucker factor | / | ISRI 8593 8592 |
0.020> | 0.015 |
Heat transfer factor
(standard number) |
W/m K | 0.140> | 0.132 |